This is an ABB IRB 2400L industrial robot with M98 S4C controller. It has a 5-7kg payload and 1.8m reach.
The ABB IRB 2400 is one of the most flexible robots in the
market in terms of the sheer number of applications to which it can be turned.
There are over 14,000 installed worldwide.
There are 3 arm types:
The standard 2400/10 with
10kg payload 1.5m reach
The higher payload
2400/16 with 16kg payload 1.5m reach
The long arm 2400L with 5
to 7 kg payload and 1.8m reach
Prices can depend on the availability of a certain model, for example the 16kg
payload is comparatively rare. The IRB 2400 arm and controller are both
protected to IP54 this means that the robot is well suited to industrial
environments. It should also be noted that there are also Foundry or Foundry
Plus versions. The Foundry versions have a special non stick paint finish and
increased IP ratings - IP55/IP67 for the foundry and IP67 and washable for the
The S4C controller
is a further development of the S4, the "C" stands for compact and
indeed this type of controller is substantially smaller and lower than the S4.
Although much of the computer system remained the same some updates were made to
both hardware and software, especially on the later M98 S4C. The S4C
controller is well regarded for its stability and reliability and has a very
fast boot up time, much faster than many current models giving minimum
downtime. Normally supplied with one I/O card giving 16 inputs and
16 outputs it can be fitted with many more if needed. Analogue I/O is
also available. The controller can also work as a PLC by controlling and
monitoring I/O signals. Up to 3 background programs (for monitoring signals for
example) can be run in parallel with the actual robot program and even
when the robot program has stopped. Outputs can be set at a specific time or
distance before a programmed position and can be executed concurrent to
the robot motion. The controller also has built in dual chain (0V and +24V)
safety circuits meaning that the robot can be run without the need for extra
emergency stop relays etc. Another benefit of the S4C controller over the S3 or
S4 is that it is much easier to feed with data as it has an optional Ethernet
connection.The IRB 2400 is employed
by the hundred around the world in a multitude of applications including MIG
welding, handling, pick and place, machine tending, milling, woodworking,
cutting, de-burring, plastics, even NON EX painting and spraying applications.
Now available on the used market at very reasonable prices the IRB 2400 is a
fantastically useful robot. Our IRB 2400s are supplied complete with the arm,
control cabinet (including I/O), cables and teach pendant. We clean, test and
repaint them before shipping. If you need manuals we can provide them. Most of
the ones we supply will have around 20,000 hours but this can vary - we are
more focused on the robot's background and overall condition.